Hi,
I am trying to create a .3sm in Microstation Connect Edition with Descartes. When I select the dgn level for the shape to clip with, the resulting .3sm ignores the shape and appears to triangulate across the clip boundary. I am getting the same result in ConceptStation if I do data import with a .dtm and an SID to create the .3sm, where the .dtm has an exterior feature but is ignored in .3sm creation.
The yellow in the image below is the clip shape the .3sm should be honoring.
Hey,
I am trying to import a video of +-30min long, about 1.22GB in size.
Each time the routine stops at approx. 41%.
What could be the cause of this?
Regards,
Werner
Hi,
with CC desktop, i'm unable to split block into subblocks to limit my number of photos to 2500 photos per subblock.
Here's my settings :
Number max of photos : 2500
Height : define base on WGS 84 min & max of the pose metadata
Base Size : my project here is approx 50 m * 20 m, so i'm using 25 as base size to reach a 25*25m square
Origin : coordinates near the project in my coordinates ending system
Is there anything wrong with this settings ?
Best regards
I am using the Merge command to save out small portions of a larger raster image.
I have a large WMS raster attached to my dgn. In a separate dgn (Boxes.dgn), I have several square shapes with unique text names inside each square shape.
Method A:
I use the Merge command and set Area: View and I can save out multiple new image files automatically by selecting boxes.dgn as the Grid Definition file.
The result is some of the image edges have an extra line of black pixels.
Method B
I use the Merge command and set Area: Block, use the cursor to define the area as a square block that matches one of the squares in Boxes.dgn, and set the Output type to Single File and save out a new image file.
The resulting image doesn't have any extra black pixels.
Note: The Resolution settings in the Merge dialog were the same in both methods.
Shouldn't I be getting identical results from both methods?
Regards,
Ron
Hi all. I have been making a few models with CC and had a go at said models in LumenRT. I'm working on a Zbook Studio G3, 32 Gb RAM and only a Nvidia Quadro M1000M. I have been looking at either an I5 or I7 (I have been playing PC games for quite a few years and the I5 models are often prefered due to price and clock capabilities) 32 or even 64 gigs of RAM and Either a single high end Nvidia GTX card or 2 GTX Titan cards in SLI. Since it will be a work station I'm thinking overclocking might not be a smart choice, and if I could use it to run other simulations besides the Bentley products it would help justify the investment. Hence why the Titan's would be prefered since Mike Urban from DHI supports utilization of GPU's for parallelisation.
Since Bentley keeps making more and more 3D heavy tools, which I am a big fan of, my laptop is starting to overheat often, and working with large terrainfiles, multiple elements and models should in my oppinion be done on a stationary PC with proper airflow and cooling.
I was not able to find a workflow for using basemap in ContextCapture Help and just wondering if there was some information you could share with me, please.
My team currently uses BlueMix Devops and would like to download the latest version of the Eclipse RTC plugin (ver 6) into my eclipse environment because it has a couple bug fixes that would really help me.
What RTC Plugin versions are supported against BlueMix DevOps? What version of RTC is installed on BlueMix DevOps? When can we expect version 6 of Eclipse RTC to be supported by the BlueMix DevOps?
Hello all,
I took several images from my DJI Mavic Air. When I try to import the photos I'm getting this coordinates error:
The Exif coordinates are ok. I opened them at QGIS and all the positioning are ok.
Do you know why is it happening?
Thank you.
Hi, I know CC could ouput the product to 3dTiles format for CesiumJS, and what I am doing is developing a tool which could convert osgb files produced by CC to 3dTiles. The problem is that the tileset converted from my tool could not overlay exactly with that produced by CC, seems there remains an rotation (as the image shows, the wall will get crossed ). So most likely the"Transform" of the tileset.json I computed is wrong, the way of mine is fristly transform the position of the coordinate from matadata.xml to WGS84 (EPSG Code:4326), and then use the position to compute ENU matrix *** I treat as the transform matrix. Is that all right? anything I have missed up?
The TIN was created from an STM resulting from CC photo processing. When I load the TIN into Microstation Power Geopak V8i and then load the DTM Features (contours, triangles, TIN hull, etc.) they don't display. The comment ribbon on the bottom of the screen says it's loaded, but I can't see anything. All levels are turned on and I've zoomed extents.
Thank you.
Hi All,
I have a requirement of 3D Mesh production using airborne images (Oblique and Nadir Images available). This is a not a drone images.
Is this possible in the context capture to process Large format aerial images flown using aircraft??
IF yes,
What are all the inputs need to be given, I have camera information aerial images and AT results in XYZOPK.
Can anybody guide me?
Hi there...i have a problem during processing...while processing image, my hardware became freeze and i don't know why it happend...i build my hardware according to recommended spect....does anybody help me to solve this problem.........
The image below shows side-by-side comparison of results from Connect Edition vs V8i SS4.
These same setting were used in both Connect and V8i SS4
The V8i SS4 result is visually identical to the original source image.
Installation fails: Failed to copy payload for Contextcapture Editor Update 3
[217C:0388][2018-12-18T11:30:33]i000: Fetch Download URL for PayloadId = 4bf4ad37-4319-4c4d-90c8-f97a1e5964ae, Resolver = , RetryCount = 1
[217C:0388][2018-12-18T11:30:33]e000: SetHeaders (): Added bootstrapper id in header, {76e5906a-8f1a-49a8-ad04-bf30acba3162}
[217C:0388][2018-12-18T11:30:33]i000: Getting resolver URL. Attempt: 1
[217C:0388][2018-12-18T11:30:33]i000: Resolving from URL: https://payloadresolvesvc.bentley.com/api/Resolver/
[217C:0388][2018-12-18T11:30:33]i000: Resolving from URL: https://payloadresolvesvc.bentley.com/api/Resolver/
[217C:0388][2018-12-18T11:30:33]i000: Payload DownloadString = {"Status":-1,"PayloadPath":null,"ErrorMessage":"Requested Payload path was not found"}Tried also japanese install same result:
29AC:2768][2018-12-18T12:08:15]i000: Fetch Download URL for PayloadId = 4bf4ad37-4319-4c4d-90c8-f97a1e5964ae, Resolver = , RetryCount = 0
[29AC:2768][2018-12-18T12:08:15]e000: SetHeaders (): Added bootstrapper id in header, {a6ffd22a-7120-4f07-999c-c902e250661f}
[29AC:2768][2018-12-18T12:08:15]i000: Getting resolver URL. Attempt: 1
[29AC:2768][2018-12-18T12:08:15]i000: Resolving from URL: https://payloadresolvesvc.bentley.com/api/Resolver/
[29AC:2768][2018-12-18T12:08:15]i000: Resolving from URL: https://payloadresolvesvc.bentley.com/api/Resolver/
[29AC:2768][2018-12-18T12:08:15]i000: Payload DownloadString = {"Status":-1,"PayloadPath":null,"ErrorMessage":"Requested Payload path was not found"}Also latest Descartes CONNECT Update 4 doesn't install.
I have a pdf file that I want to vectorize so I have followed the normal steps of creating a .dgn file then attaching the .pdf then merging it to a .tiff
Even when I zoom in when placing a block and then merging, I keep on getting this result.
Please advise.
Добрый день. Не могу загрузить метаданные в формате txt. Пробовал разные варианты (xls,xml и пр.), не получается.
Hello,
I am dealing with a pdf file that I have attached to Bentley Descartes and merged it to tiff file. (I am using Bentley Descartes CONNECT edition update 4) and I can't find any text vectorizing tool that I can use for the text.
Please advise.
Regards,
Hello, I'm new to ContextCapture. I'm using 10.366 version. I want to make Mesh model with point cloud, but when I import data, then it isn't showing in 3D view table. In Point Clouds table shows that it was successful import(showing number of points), but when I generated model mesh there was nothing in it. Does anyone know why is it happening?
Hello,
I have a RM production .3mx file which is geo-referenced in UTM WGS84 system.
This represents the super structure of a highway bridge.
I also have another RM production .3mx file generated from photos of the sub-structure of the same bridge, which was captured using a DSLR camera without geo-reference.
Is is possible to merge these two productions using any product line from Bentley?
Tx
SRG
Hello all,
Can someone inform me what the difference and benefits there are to using these different types of sockets/wrenches? From my own personal experience, the 12 point type wrenches are more likely to strip a bolt. I was recently working on my car and was having difficulty removing a bolt, one of the mechanics saw what I was using and told me I needed a 6 point box wrench.
My current tool set is a Craftsmen 255 piece set. It has 6 and 12 point sockets for 1/4 and 3/8 drive, but the 1/2 inch drive only has 12 point sockets. All the box wrenches are 12 point.
Thanks.